Regulation

FCC counsel says a ban on foreign thermal, LiDAR and spray drones is still under review

An FCC national security lawyer told a podcast the agency is still reading comments and might allow a transition. Its July notice already proposes 180 days.

2 min readDroneFlow.Ai News Desk

A DJI Matrice 300 RTK enterprise drone
A DJI Matrice 300 RTK, shown as an example of an enterprise drone. The FCC proposal is not limited to one maker. · Gaelle1106 via Wikimedia Commons / source / CC BY-SA 4.0

The Federal Communications Commission has not settled whether to stop imports and sales of previously approved foreign drones in several professional categories, according to DroneXL's report on an interview with Adam Chan, the agency's senior national security counsel. Chan spoke on The Drone Ultimatum podcast, published October 30.

What the notice covers

The proposal is the FCC's July 21 notice in PS Docket 26-189. It names seven groups of equipment:

  • Aircraft of 55 pounds or more at takeoff
  • Aircraft able to dispense pesticides and similar chemicals under FAA rules
  • Aircraft with thermal imaging sensors
  • Aircraft with LiDAR sensors
  • Docking stations
  • Aircraft specially designed to incorporate a defense article
  • Swarming aircraft

Under the notice, the prohibition would begin 180 days after the order appears in the Federal Register. It would not affect continued use of drones that operators have already bought.

What Chan added

DroneXL reports that Chan said the agency is reviewing the comments, that some transition period is possible, and that exceptions including Blue UAS would remain available. The 180-day figure was already in the written proposal, so his remarks did not add to it. He also put new commercial drone investment since the FCC's December action at $5 billion to $6 billion, with more than 5,000 jobs, and gave no breakdown. The FCC's July fact sheet had said over $4 billion, DroneXL notes.

The comment record

DroneXL says the docket closed September 2 with 3,829 comments, citing a coding of the filings by Pilot Institute, which it describes as a partner. By that count, 443 filings addressed the 180-day window and 439 of them wanted more time, by way of a phase-in, grandfathering, a sell-through period or a waiver. The American Spray Drone Coalition asked the agency to leave FAA Part 137 spray aircraft out altogether.

Chan also discussed a second proceeding, PS Docket 26-184, which would cut off previously authorized equipment from nine companies. DroneXL says he named Xtra, Skyhigh and XAG, and notes that the FCC notice does not allege that XAG's aircraft copy DJI hardware, unlike the other eight.

DroneXL's report gives no date for a decision on either proceeding.

Why it matters

Thermal and LiDAR aircraft are everyday survey and inspection tools. The proposal leaves drones you already own alone, but it would decide whether new units of covered foreign models can still be imported and sold.

Sources and original reporting

Written by the DroneFlow.Ai News Desk from the sources above. Spotted an error? Tell us and we will correct it.

Fly it, then map it

Upload your drone photos and get maps, 3D models and measurements — free trial, no credit card.

Start Free Trial